In the cold and windy winter, it feels miserable every time going out of the house, and the idea of going out every time becomes, "you might as well go out when the weather is better!"

So, during the relaxing weekend, many people choose to bury themselves in bed.

At this time, they began to imagine that if only all the daily necessities were available, so the bed table became their most convenient choice.

This kind of bed table is also divided into two types: table feet on the bed and on the floor. Bizzoelife's bed table is the kind of the latter, so that the table area is larger, can put more things, but also requires more assembly steps, of course, the process is very simple, a total of only six steps.

If you're worrying about assembling the bed you bought on the table, keep watching.

 

Please make sure that you have all accessories before assembly.

Parts list

①Desktop panel (1pc)
②Front baffle (2pcs)
③Side baffle (2pcs)
④Support tube (2pcs)
⑤Metal leg frame (2pcs)

over bed table

Screws & Tools

A. Screw: M6*60 (8pcs)
B. Screw: M6*50 (14pcs)
C. Nut: M6 (8pcs)
D. Screw: ST7*40 (12pcs)
E1. Feet pad (4pcs)
E2. Wheel (4pcs)
Allen wrench
Screwdriver

 over bed table

For this table, we have two ways to use it. If you want to use it on bed, please see step 1. If you want to use it in kitchen and living room, please see step 1-1.

The remaining five installation steps are the same.

Step 1:

According to the illustration, install the feet pad (E1) to the bottom of the metal leg frame ().

In this step, you will use 4 feet pads E1.

over bed table

Step 1-1:

According to the illustration, install the wheel (E2) to the bottom of the metal leg frame ().

In this step, you will use 4 wheels E2.

 over bed table

Step2:

According to the illustration, install the support tubes () to the metal leg frames () with screw A.

In this step, you will use 8 screws A.

 over bed table

Step 3:

According to the illustration, connect the support tubes () and the metal leg frames () with screw B and nut C.

In this step, you will use 8 screws B and 8 screws C.

 over bed table

Step 4:

According to the illustration, install the desktop panel () to the part which has finished by the last step with screw B.

In this step, you will use 6 screws B.

 over bed table

Step 5:

According to the illustration, install the front baffle () to the desktop panel () with screw D.

In this step, you will use 6 screws D.

 over bed table

Step 6:

According to the illustration, install the side baffle () to the desktop panel () with screw D.

And connect the side baffle () and front baffle () with screw D.

In this step, you will use 6 screws D.

over bed table