Before all the assembly processes, please make sure that if your accessories list is complete and if any pieces are missing to ensure that your assembly process goes smoothly.
Parts list
①Left leg frame (1pc)②Right leg frame (1pc)
③Metal tube (1pc)
④Cross bar (1pc)
⑤Left tie rod (1pc)
⑥Right tie rod (1pc)
⑦Desktop panel (1pc)
If you are not sure what these parts look like, you can refer to the following figure:
Screw & Tools
A. Screw: M8*15 (12pcs)B. Screw: M6*10 (6pcs)
C. Cable grommet (2pcs)
USB cable (1pc)
Allen wrench (1pc)
Screwdriver (1pc)
If you are not sure what these screws and tools look like, you can refer to the following figure:
Detailed assembly process:
Step 1: Assembling cross bar & leg frame
According to the illustration, connect the cross bar (④) to the left leg frame (①) and right leg frame (②) with screw A.
In this step, you will use 4 screws, 2 on each side of the left and right.
The upper and lower sides of the cross bar (④) are different, please pay attention to the direction of the cross bar (④).
Step 2: Assembling tie rod & cross bar & leg frame
According to the illustration, connect the tie rod (⑤⑥) to the cross bar (④) and leg frames (①②) with screw A.
In this step, you will use 8 screws, 4 on each side of the left and right.
Step 3: Assembling metal tube & leg frame
According to the illustration, put the metal tube (③) into the card slot position of the leg frames (①②) to connect the USB cable and the port of the leg frames (①②).
Step 4: Assembling desktop panel & cable grommet
According to the illustration, install the desktop panel (⑦) to the metal frame which has finished by the last step with screw B.
Install the cable grommet (C) to the hole of the desktop panel (⑦).
In this step, you will use 6 screws and 2 cable grommets.
All of our height and length designs follow ergonomic principles, you no longer need to worry about size, just choose a right chair, and you can swim in the game world with our Bizzoelife gaming desk.