Many TV stands always look so beautiful in pictures, and it is not until people actually assemble them that they know that this is not the case at all.

The complex assembly process is always exhausting, and the unprofessional approach makes the finished product look bad.

If you are looking for a way to assemble the Bizzoelife barn door TV stand, then this blog can solve your urgent needs.

This is definitely the most detailed and simple TV stand assembly tutorial you have ever seen, which can be completed in less than ten steps, making your TV stand as beautiful as it is shown in the picture.

 

Preparing a list of items in advance is a very important step in order to make the assembly process smoother. Let's check it out first.

 

Parts list:

①Board (1pc)

②Left side board (1pc)

③Right side board (1pc)

④Left vertical board (1pc)

⑤Right vertical board (1pc)

⑥Left door board (1pc)

⑦Right door board (1pc)

⑧Lower apron (1pc)

⑨Lower apron (1pc)

⑩Front apron (1pc)

⑪Front apron (1pc)

⑫Leg board (2pcs)

⑬Bottom board (1pc)

⑭Small layer board (2pcs)

⑮Large layer board (1pc)

⑯Back board (2pcs)

⑰Middle back board (1pc)

 barn door TV stand

Screws & Tools:

A. Cam lock:15*10 (30pcs)

B. Cam bolt (30pcs)

C. Wood dowel:8*30 (24pcs)

D. Screw:4.2*13 (16pcs)

E. Screw (6pcs)

F. Bolt:4*20 (6pcs)

G. Screw:4.2*35 (12pcs)

H. Support pin (8pcs)

I. Hanging wheel (4pcs)

J. Handle (2pcs)

K. Screw: 3.5*12 (6pcs)

L. Iron sheet (1pc)

M. Adjusting foot pin (4pcs)

N. Slide (1pc)

Screwdriver

 barn door TV stand

Step 1:

According to the illustration, screw the cam bolt (B) into the left and right vertical boards (④⑤), then put the wood dowel (C) into the two boards.

In this step, you will use 4 cam bolts B and 4 wood dowels C.

 barn door TV stand

Step 2:

According to the illustration, attach the large layer board (⑮) onto the left and right vertical boards (④⑤).

Please make sure the grooves of the two vertical boards are at the same side.

Then insert and tighten cam lock (A) into the predrilled holes of the large layer board (⑮).

In this step, you will use 4 cam locks A.

 barn door TV stand

Step 3:

Firstly, put the bottom board (⑬) upside down (the side with grooves should be downward).

Secondly, attach the lower apron (⑧⑨) onto the bottom board by using screw (G).

Thirdly, attach the leg board (⑫) onto the bottom board (⑬).

Lastly, connect the two pcs from apron (⑩⑪) with screw K and iron sheet L.

In this step, you will use 6 screws G, 2 wood dowels C, 4 screws K and an iron sheet L.

 barn door TV stand

Step 4:

According to the illustration, turn the bottom board (⑬) over to make the side with grooves face upward, put the wood dowel (C) onto the board.

Next, screw cam bolt (B) into the bottom board (⑬).

Last use screw G to connect 2 pcs of board (⑫).

In this step, you will use 4 cam bolts B, 4 wood dowels C and 4 screws G.

 barn door TV stand

Step 5:

According to the illustration, attach the part finished at step 2 onto the bottom board (⑬).

Please make sure the grooves of the vertical boards (④⑤) should at the rear side.

Insert the tighten cam lock (A) into the predrilled holes of the vertical boards.

Attach the front apron (⑩⑪) onto the vertical boards.

Attach the adjustable feet onto board (⑫).

In this step, you will use 4 cam locks and 4 adjusting foot pins.

 barn door TV stand

Step 6:

According to the illustration, put the wood dowel (C) onto the left the right side boards (②③).

Screw cam bolt (B) into the two boards.

In this step, you will use 10 cam bolts B and 4 wood dowels C.

 barn door TV stand

Step 7:

According to the illustration, attach the side boards (②③) onto the two sides of the cabinet.

Insert and tighten cam lock (A) into the predrilled holes of the bottom board (⑬), and the front apron (⑩⑪).

Then install the slide (N) onto the front apron (⑩⑪) by using screw (D).

In this step, you will use 10 cam locks A and 4 screws D.

 barn door TV stand

Step 8:

According to the illustration, make the TV cabinet stand and slide the back boards (⑯⑰) into the grooves.

 barn door TV stand

Step 9:

According to the illustration, put the wood dowel (C) onto the board (①) and screw cam bolt (B) into the board.

In this step, you will use 10 cam bolts B and 8 wood dowels C.

 barn door TV stand

Step 10:

According to the illustration, attach the board (①) onto the cabinet, insert and tighten cam lock (A) into the predrilled holes of the side boards (②③) and the vertical boards (④⑤).

In this step, you will use 10 cam locks A.

 barn door TV stand

Step 11:

According to the illustration, find the desired layering location and put the support pin (H) into the predrilled holes.

Put the small layer boards (⑭) onto the support pins.

In this step, you will use 8 support pins H.

 barn door TV stand

Step 12:

According to the illustration, install the hanging wheels (I) onto the door boards (⑥⑦) by using screw D.

Attach screw (E) into the bottom of the door boards (⑥⑦).

In this step, you will use 8 screws D, 4 screws E and 4 hanging wheels I.

 barn door TV stand

Step 13:

According to the illustration, install the handles (J) onto the doors (⑥⑦) by using bolt (F).

In this step, you will use 4 bolts F and 2 handles J.

 barn door TV stand

Step 14:

According to the illustration, attach the doors onto the cabinet as the photo shown.

 barn door TV stand

Step 15:

According to the illustration, fasten the middle back board (⑰) by using screw (D).

In this step, you will use 2 screws D.

barn door TV stand