A study desk with hutch is the desk that many people dreamed of in their childhood, at least I am.

When I visited a friend's house, I saw that his desk with many hutches was covered with all kinds of interesting gadgets. The whole desk was like a treasure chest, both beautiful and interesting.

If you buy the Bizzoelife modern computer desk with hutch, I’m sure you can understand what I’m talking about. It is just the one I’ve dreamed of.

Now this blog is for you to assemble your computer desk more smoothly. Hope it helps you.

 

Before everything started, let’s check that your list of items first.

Parts list

①Desktop board (1pc)
②Top shelf baffle (1pc)
③Top shelf board (1pc)
④Desktop baffle (1pc)
⑤Shelf board (1pc)
⑥Shelf board (1pc)
⑦Shelf board (1pc)
⑧Left iron frame (1pc)
⑨Middle iron frame (1pc)
⑩Right iron frame (1pc)
⑪Tube (3pcs)
⑫Left leg frame (1pc)
⑬Middle leg frame (1pc)
⑭Right leg frame (1pc)
⑮Tube (2pcs)
⑯Tube (1pc)

computer desk

Screws & Tools

A. Screw: M6*35 (21pcs)
B. Screw: M6*45 (15pcs)
C. Screw: M6*60 (5pcs)
D. Screw: ST4*50 (10pcs)
E. Screw: ST7*40 (2pcs)
F. Screw: ST5*70 (2pcs)
G. Nut: M6 (4pcs)
H. Desk feet pad (6pcs)
Wrench
Screwdriver
Allen wrench

computer desk

Step 1:

According to the illustration, connect install the desk feet pad (H) to the bottom of the leg frame (⑫⑬⑭).

In this step, you will use 6 desk feet pads H.

 computer desk

Step 2:

According to the illustration, connect the tube () to the leg frame () and leg frame () with screw B.

Please pay attention that the holes of the tube () are facing up.

In this step, you will use 4 screws B.

 computer desk

Step 3:

According to the illustration, connect the tube () to the leg frame () and leg frame () with screw B.

And connect the tube () to the leg frame () and leg frame () with screw B.

Please pay attention that the holes of the tube () are facing up. Don’t need to tighten the screw B which is on the side of the tube ().

In this step, you will use 6 screws B.

 computer desk

Step 4:

According to the illustration, connect the tube () to the leg frame () with screw B.

And install the screw A into the board () and ()

In this step, you will use 8 screws A and 2 screws B.

 computer desk

Step 5:

According to the illustration, connect the board () to the tube () with screw A.

Please pay attention that the holes of the board () are facing up (as shown in the figure).

Please make sure board () and all related screws aligned with the metal frame components.

And please tighten all the screws after the board () is installed.

In this step, you will use 4 screws A.

 computer desk

Step 6:

According to the illustration, connect the baffle () to the iron frame () and iron frame () with screw D.

Please pay attention that the hole positions of the baffle () are down.

In this step, you will 4 screws D.

 computer desk

Step 7:

According to the illustration, connect the tube () to the iron frame (⑧⑨⑩) with screw B.

In this step, you will use 3 screws B.

 computer desk

Step 8:

According to the illustration, connect the board () to the iron frame () and tube () with screw A.

And connect the board () to the iron frame () and iron frame () with screw D.

In this step, you will use 4 screws A and 2 screws D.

 computer desk

Step 9:

According to the illustration, connect the baffle () to the iron frame () and Iron frame () with screw D.

And connect the baffle () and the board () with screw E.

In this step, you will use 4 screws D and 2 screws E.

 computer desk

Step 10:

According to the illustration, install screw A into the board ().

In this step, you will use 4 screws A.

 computer desk

Step 11:

According to the illustration, connect the board () and the baffle () with screw F.

And connect the iron frame () and iron frame () to the desktop with screws C and nuts G.

Then connect the board () and the iron frame () with screw A and C.

Please pay attention: firstly, aligned related screws with metal components; secondly, tighten up screw F. then tighten up screws A, C, G; finally, please check and make sure all screws/hardware tightened up fully.

In this step, you will use a screw A, 5 screws C, 2 screws F and 4 nuts G.

 computer desk