Bizzoelife's L-shaped corner computer desk has always been popular with consumers, and sales have been in the lead since it hit the shelves.

Now in order to give customers who have bought our L-shaped corner computer desk a better shopping experience, a smoother installation process, and to reassure customers who are worried about the complex assembly process, here is a step-by-step assembly tutorial, you will find that the whole process is so simple.

Before the whole hands-on process begins, please make sure that your parts list is complete.

 

Parts list

①Right Desktop panel
②Left Desktop panel
③Corner Desktop panel
④Left leg frame
⑤Left Metal Support tube
⑥Right Metal Support tube
⑦Right Leg frame
⑧Shelf Leg
⑨Metal Inclined rod
⑩Corner Leg frame
⑪Bottom T-shaped tube
⑫Top T-shaped tube
⑬Shelf panel
⑭Stand panel
⑮Short tube

The following figure is a sample reference for these parts:

computer desk

Screws & Tools

A. Screw: ST3.5*14 (24pcs)
B. Screw: M6*10 (4pcs)
C. Screw: M6*30 (18pcs)
D. Screw: M6*45 (6pcs)
E. Screw: M6*50 (3pcs)
F. Screw: ST5*50 (8pcs)
G. Nut (5pcs)
H. Feet (9pcs)
I. Stand feet (4pcs)
J. Iron sheets (4pcs)
Wrench (1pc)
Screwdriver (1pc)
Allen wrench (1pc)

The following figure is a sample reference for these screws and tools:

 computer desk

Step-by-step assembly process:

Step 1:

According to the illustration, install the short tube () to the bottom of the right desktop panel () and left desktop panel () with screw C.

In this step, you will use 4 screws, 2 on each side of the left and right.

computer desk

Step 2:

According to the illustration, install the feet (H) to the bottom of part 4, 7, 8, 10 and 11.

In this step, you will use 9 feet.

computer desk

Step 3:

According to the illustration, connect the T-shaped tube (⑪) to the bottom tube of the corner leg frame (⑩) with screw D. And connect the bottom T-shaped tube (⑪) and the top T-shaped tube (⑫) with screw D. Then connect the T-shaped tube (⑫) to the top tube of the corner leg frame (⑩) with screw E and nut G.

In this step, you will use 2 screws D and 1 screw E and 1 nut G.

computer desk

Step 4:

According to the illustration, connect the metal support tube (⑤) to the part which has finished by the last step with screw D. And connect the metal support tube () to the left leg frame () with screw D.

In this step, you will use 2 screws.

Attention to the hole direction of the left leg frame (④), it is to install the metal inclined rod () by step 9.

computer desk

Step 5:

According to the illustration, connect the metal support tube (⑥) to the part which has finished by the last step with screw D. And connect the metal support tube () to the right leg frame () with screw D.

In this step, you will use 2 screws.

Attention to the hole direction of the right leg frame (⑦), it is to install the metal inclined rod () by step 9.

computer desk

Step 6:

According to the illustration, connect the shelf panel () to the right leg frame (⑦) and shelf leg () with screw F.

In this step, you will use 8 screws.

computer desk

Step 7:

According to the illustration, install the left desktop panel (②) and corner desktop panel () to the part which has finished by step 6 with screw C.

And install the right desktop panel (①) to the part which has finished by step 6 with screw B and screw C.

In this step, you will use 4 screws B and 12 screws C.

computer desk

Step 8:

According to the illustration, connect the left desktop panel (②) and corner desktop panel () with screw A and iron sheets J.

And connect the right desktop panel (①) and corner desktop panel () with screw A and iron sheets J.

In this step, you will use 16 screws A and 4 iron sheets J.

computer desk

Step 9:

According to the illustration, connect the metal inclined rod (⑨) to the short tube (⑮) and left frame (④) with screw C, E and nut G.

And connect the metal inclined rod (⑨) to the short tube (⑮) and right frame (④) with screw C, E and nut G.

In this step, you will use 2 screws C and 2 screws E and 4 nuts G.

computer desk

Step 10:

According to the illustration, install the stand feet (I) to the stand panel (⑭) with screw A.

In this step, you will use 8 screws A and 4 stand feet I.

 computer desk